|
Click
on the picture for a larger view
 Ceiling-recessed, motorized screen with
automatic screen closure. Ideal for boardrooms and meeting rooms. Its
independently motorized aluminum ceiling closure disappears into the
case when the screen is lowered, for a perfectly unobstructed view.
Hinges are completely concealed, and the closure is supported for its
entire length—no sag is possible. Motor-in-roller is mounted on
special vibration insulators so operating noise is dramatically reduced.
The reflective surface is laminated to a woven textile base and hangs
suitably flat because of the stability of the material and the weight of
the bottom dowel.
Four
surfaces from which to choose:
Matt White—Laminated
to tear-resistant woven fiberglass. It diffuses projected light in all
directions, so the image can be seen from any angle. Provides accurate
color rendition as well as superior clarity. Recommended for use with
all high light output projection devices. Requires control of ambient
light in the audience area. Gain 1.0
High
Contrast Grey—Grey
textile backed surface offers excellent resolution while enhancing the
blacks of LCD and DLP projected images, even as whites and lighter
colors are maintained. Performs well in ambient light condition. High
Contrast Grey’s lower gain of 0.8 allows use with even the brightest
projectors; viewing cone of 180°. Seamless in sizes up to 8'
in
height.
Acoustically
transparent screen material.
AT1200—The
most innovative and versatile acoustically transparent screen material.
Similar in gain performance to standard matt white. Acoustical
properties comparable to the finest speaker grille cloth. Gain 1.0
AT
Grey—AT
Grey offers the acoustical properties of our popular AT1200, while
providing the best optical qualities of both Matt White and High
Contrast Grey. It is unique in that it offers both a 180° viewing cone and
the vivid color contrast associated with high contrast grey materials.
Washable, flame and mildew resistant. Available in sizes through 6’ x
8’ or 10’ diagonal. Gain of 0.8. Not recommended for screens smaller
than 80” wide when used with LCD or DLP projectors.
Contact
the our sales department for
discounted pricing & installation information. |
